DuraWatt | NormaWatt | CuadraWatt | MicroWatt | HelicoWatt
DuraWatt:
Cartridge Heaters
Maxiwatt compressed cartridges
 Cartridges with high
wattages. They provide a great uniform
distribution of heat, and are made hermetically, which considerably increases
the long life of the resistance as well as preventing the oxidation of the
heater wire even at high temperatures. Over 8000 measurements in high density.
High charge Maxiwatt cartridges are made from prime quality materials and
undergo the strictest control for safety, complying with international
standards.
 |
Long-life |
|
|
High temperatures |
|
|
Variety of terminations |
|
|
Maximum watts capacity 60w/cm2 |
Technical Data
| Heat
intensity |
Not exceeding 40Wcm2
(advisable) |
|
Power |
Depends on the dimension |
|
Escape of current (when cold) |
<=0.1mA a 242 v. |
|
Insulation (when cold) |
5 Min Ohmios 500 Watts
minimum |
|
Dielectric strength |
1500v. 1/seg |
|
Working temperature |
750ºG max. |
|
Tolerance of length |
+/-1.5% |
|
Tolerance of diameter |
-0.01 a -0.06 m/m
|
|
Tolerance of cut of connexion |
+/-15 mlm |
|
Power tolerance (w) |
+ 5 % - 10 % |
| Cold
areas |
Depends on length and
diameter 5-25mm |
Use
They are able to withstand the toughest working conditions, such as
vibration, moisture, fluid, spills, frequent expansion and where
temperatures of between 400ºC and 750ºC are required, or temperatures
within a limited space.
Applications
|
|
Moulds |
|
|
Smelting of
materials |
|
|
Heating of fluids |
|
|
Heat welding, etc |
Call us
now to discuss your hand held sensors and meters needs. |
